Shop All

Methyl Ethyl Ketone, also known as MEK or Butanone is an organic compound with the formula C4H80. Methyl Ethyl Ketone is a solvent used in surface coatings, adhesives, printing inks, chemical intermediates, magnetic tapes and lube oil dewaxing agents...

Methacrylic Acid, also known as MAA, Acrylic Acid, or 2-Propenoic acid, 2-methyl- is an organic compound with the formula C4H602. It's clear, colorless, volatile liquid with a characteristic odor. Methacrylic Acid is slightly soluble in warm water and...

Toluene, also known as Methyl benzene, Methyl benzol, Phenyl methane, or Toluol is a substituted aromatic hydrocarbon with the formula C7H8. Toluene is a colorless, aromatic hydrocarbon, which is used as a solvent in the manufacture benzoic acid,...

Glacial Acetic Acid, also known as Acetic Acid, Ethanoic Acid, or GAA is an organic compound with the formula C2H402. It's clear, colorless, volatile liquid with a vinegar-like odor. Glacial acetic acid is the anhydrous (undiluted or free of water) form...

Tetrahydroduran, also known as Diethylene oxide, Oxolane, Tetramethylene oxide, or THF is a cyclic ether with the formula C4H80. Tetrahydrofuran is a colorless, volatile liquid, which is used as a solvent for natural and synthetic resins, particularly...

Trichloroethylene, also known as TCE, Ethylene Trichloride, or Trichloroethene is a halocarbon with the formula C2HCl3. Trichloroethylene is a synthetic, light sensitive, volatile, colorless, liquid that is miscible with many non-polar organic solvents...

Methyl Methacrylate, also known as MMA, Methacrylic acid methyl ester, or Methyl 2-methylprop-2-enoate is an organic compound with the formula C4H80. It's clear, colorless, volatile liquid with a characteristic odor. MMA is slightly soluble in water and...

Methyl acetate, also known as MeOAc, acetic acid methyl ester or methyl ethanoate, is a carboxylate ester with the formula CH3COOCH3. Methyl Acetate is a colorless, volatile liquid, which is used as a solvent for nitrocellulose, acetylcellulose; in many...

PS-30 & PS-18 monomer based thinner is used to lower the viscosity of PS-30 Component (A) and PS-18 Component (A). Lowering the viscosity may allow more ease for air pockets (bubbles) to escape from the joint being bonded or easier handling for the...

Caseway SC-140 Low VOC Solvent Cement is specially formulated for bonding acrylic to itself and other plastics such as polycarbonate, polystyrene, and CAB (cellulose acetate butyrate). Recommended when fast setup time is required, it will develop a...

PS-18 Acrylic Adhesive (Component C Promoter).

Blunt tip stainless steel dispensing needle 17 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Caseway Industrial 3-D Printing Cement is a clear, all purpose thickened cement specially formulated for bonding 3-D printed parts. Recommended for bonding PLA to itself and other plastics such as acrylic, styrene, butyrate, PVC, ABS, and polycarbonate...

Blunt tip stainless steel dispensing needle 15 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Caseway SC-203 Cement is specially formulated for bonding rigid vinyl to itself and other plastics such as acrylic, Kydex©, and ABS. It will develop a strong bond within minutes and can be applied quickly by brush, syringe, dropper, dauber, or...

BA-400 Component B is part of the BA-400 Nylon Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A...

BA-430 Component B is part of the BA-430 Polyurethane Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in...

BA-460 Component B is part of the BA-460 Phenolic Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A...

BA-460 Component A is part of the BA-460 Phenolic Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A...

BA-430 Component A is part of the BA-430 Polyurethane Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in...

BA-400 Component A is part of the BA-400 Nylon Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A...

BA-500 Component B of the BA-500 Teflon Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A will...

10cc/10ml solvent resistant, reusable syringe barrels. Luer Lock (also known as Luer-Lok) hub keeps needle tip from slipping off. Solvent resistant, reusable Luer Lock syringe barrels. Great for solder paste dispensing, adhesives and super glues, inkjet...

5cc/5ml solvent resistant, reusable syringe barrels. Luer Lock (also known as Luer-Lok) hub keeps needle tip from slipping off. Solvent resistant, reusable Luer Lock syringe barrels. Great for solder paste dispensing, adhesives and super glues, inkjet...

3cc/3ml solvent resistant, reusable syringe barrels. Luer Lock (also known as Luer-Lok) hub keeps needle tip from slipping off. Solvent resistant, reusable Luer Lock syringe barrels. Great for solder paste dispensing, adhesives and super glues, inkjet...

Blunt tip stainless steel dispensing needle 25 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Blunt tip stainless steel dispensing needle 22 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Blunt tip stainless steel dispensing needle 20 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Blunt tip stainless steel dispensing needle 18 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Blunt tip stainless steel dispensing needle 16 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

Blunt tip stainless steel dispensing needle 14 gauge x 0.5" inch length. A blunt end needle is a safe and efficient way to accurately dispense materials. Compatible with all Caseway luer-lock caps and syringes. UV safe plastic hub with luer...

LDPE 2 ounce cylinder bottle typically used as a squeeze bottle to dispense material with accuracy. Ideal for dispensing flux, solvents, inks, adhesives, paints, and solder mask. Comes with a Luer-Lock cap for accepting standard dispensing needles plus a...

BA-500 Component A is part of the BA-500 Teflon Adhesive kit. Using different mixing ratios may have better performance when boding dissimilar substrates. An increase in Component B will give more flexibility while inversely an increase in Component A...

PS-18 Acrylic Adhesive (Component B Catalyst).

PS-30 Acrylic Adhesive (Component B Catalyst). 

PS-18 Acrylic Adhesive (Component A).

PS-30 Acrylic Adhesive (Component A)

Caseway SC-201 is a water-thin, fast curing cement for bonding vinyl (especially vinyl film) to itself and other plastics such as ABS, PVC, Kydex®, Sintra®, Expanded PVC and PETG. It will develop a strong bond within minutes and can easily be...

Caseway PS-30 is a clear, two-component adhesive for bonding acrylic to itself and other plastics such as Kydex®, vinyl, polycarbonate, CAB, ABS, and other materials. PS-30 is non-yellowing and resists weathering. It polymerizes at room temperature...

Caseway Delete is an industrial solvent used to completely remove vinyl logos, lettering, and residue from clothing within a few seconds. Delete dries very fast and works on almost any fabric. Delete is not intended to remove vinyl logos, letters, or...